Danfoss AAF 007 Installation Manual page 6

Installation Guide | Advanced Active Filter AAF 007
Verifying the Shipment and the Contents
1.5
Ensure that the items supplied and the information on the nameplate correspond to the order confirmation. The filter module label is on
the top of each filter module.
Figure 1: Filter Module Label, Example for 55 A Unit
The nameplate is delivered with the order as a separate item and must be placed on the filter highly visible after installation.
Figure 2: System Label
Installing the Filter
1.6
SHOCK HAZARD
Touching hazardous live parts can result in death or serious injury.
This IP20/open type filter does not provide protection against direct contact to hazardous live parts. It is intended to be
l
installed inside a supplementary enclosure or in a restricted-access area which provides appropriate protection against
electric shock.
For compliance with EN/IEC 61000-6-8:2020, ensure that the filter is installed and maintained professionally. If the equipment
is installed closer than 30 m (98.4 ft) to a residential location, the professional installer must evaluate the EMC situation before
installation.
6 | Danfoss A/S © 2024.06
NOTICE
NOTICE
Instructions
AN430846972679en-000202 / 130R1283