Eu Declaration Of Conformity - Danfoss AAF 007 Installation Manual

Installation Guide | Advanced Active Filter AAF 007
8
2.8
Docusign Envelope ID: 7A15DFA2-8689-4A3A-AD71-A67306EE09A6
declares under our sole responsibility that the
Product category: Filters
Type designation(s): 137G3607, 137G3610, 137N1454
Covered by this declaration is in conformity with the following directive(s), standard(s) or other normative
document(s), provided that the product is used in accordance with our instructions.
Low Voltage Directive 2014/35/EU
EN 62477-1:2012,
EN 62477-1:2012/A11:2014,
EN 62477-1:2012/A1:2017,
EN 62477-1:2012/A12:2021
EMC Directive 2014/30/EU
EN 61800-3:2018
EN IEC 61000-3 -2 :2019-12
EN IEC 61000-3 -3 :2020-07
EN IEC 61000-6 -2 :2019-11
EN IEC 61000-6-4 :2020-09
RoHS Directive 2011/65/EU including amendment 2015/863
EN 63000:2018
Date: 2024.09.24 Issued by
Place of issue:
Graasten, DK Signature:
Name:Hannes Vahldiek
Title:Product Manager
Danfoss only vouches for the correctness of the English version of this declaration. In the event of the declaration being translated into any other
language, the translator concerned shall be liable for the correctness of the translation
ID No: 00777534
This doc. is managed by 500B0577
20 | Danfoss A/S © 2024.06

EU DECLARATION OF CONFORMITY

Danfoss A/S
Danfoss Drives
requirements – Part 1:General
Safety requirements for power electronic converter systems and
Adjustable speed electrical power drive systems – Part 3: EMC
Electromagnetic compatibility (EMC) – Part 3-2: Limits – Limits for
requirements and specific test methods.
harmonic current emissions (not applicable due to the fact that this
Electromagnetic compatibility (EMC) – Part 3-3: Limits - Limitation of
product is reducing the harmonic current emission )
supply systems, for equipment with rated current ≤16 A per phase and not
voltage changes, voltage fluctuations and flicker in public low-voltage
Electromagnetic compatibility (EMC) – Part 6-2: Generic standards –
subject to conditional connection (representative for units >16A)
Electromagnetic compatibility (EMC) -- Part 6-4: Generic standards –
Immunity standard for industrial environments
Emission standard for industrial environments
Technical documentation for the assessment of electrical and
electronic products with respect to the restriction of hazardous
substances.
Date: 2024.09.24
Place of issue:
Graasten, DK
Revision No: A,6
Classified as Business
Danfoss A/S
Telephone: +45 7488 2222
Fax:
Approved by
Signature:
Name:Gregers Geilager
Title:Head of BU,Water Product Management
AN430846972679en-000202 / 130R1283
Illustrations
6430 Nordborg
Denmark
CVR nr.: 20 16 57 15
+45 7449 0949