Fixing Paper Jams - Microtek S500DC Start Here Manual

Fixing Paper Jams

If paper jams or other abnormal situations occur during scanning, please follow these steps to clear
paper jams.
Paper Jammed at the Output slot
Gently pull the jammed paper out from the output
slot in the direction shown in the picture.
Paper Jammed Inside the Scanner
1. Place your hand under the release handle and
press upward in the direction shown in the
picture to open the scanner.
After opening, you will hear three beeps and
the LCD screen will display the message "Cover
Opened".
2. Lift the upper unit of the scanner to an
appropriate position where it remains securely
open.
3. Remove any jammed paper from the feed path.
4. Lower the upper unit back until it clicks into
place.
At this point, the LCD screen will display
"Ready" message to indicate that the scanner
is prepared for use.
NOTE:
• Be careful not to trap your hands or fingers when lifting or lowering the upper unit of the
scanner.
• Do not forcefully remove jammed paper from the feed tray while the upper unit is closed. Doing
so may damage the rollers and result in improper scanner functionality.
5