Fixing Paper Jams - Microtek ArtixScan DI 2015c Start Here Manual

Fixing Paper Jams

1. Open the ADF cover by lifting the two
Earlobe Levers located on each side of
the cover.
2. With the cover fully opened, pull out
the jammed document from the feeder.
If the paper is jammed in the first-stage
(paper feed) rollers, pull the paper in a
forward direction. If the paper is
jammed in the second-stage (scanning)
rollers, you may pull out the jammed
paper in either direction (forward or
backward).
3. You can also open the cover of the
scan sensor area at the bottom of the
ADF to pull out the jammed piece of
paper.
7
Earlobe Levers