Fixing Paper Jams - Microtek S6570 Start Here Manual

Fixing Paper Jams

If paper jams or other abnormal situations occur during the usage process of the scanner, please
release the paper jam using the following steps.
1. Remove the remaining documents on the
feed tray that have not been scanned yet.
2. Lift up the Release button in the direction
as shown in the figure to open the scanner
cover.
3. Remove the jammed paper inside the paper
path.
4. Close the scanner cover and place the
remaining paper back to perform scanning.
NOTE: Do not forcefully remove a jammed paper on
the feed tray when the scanner cover is closed. Doing
so may damage the rollers and result in improper
scanner functionality.
Scanner cover
5
Release button