Virutex PEB ZeroLine Operating Instructions Manual page 14

PEB
ZeroLine
PORTABLE EDgEBANDER PEB
Read these OPERATING INSTRUCTIONS and the attached GENERAL SAFETY INSTRUCTIONS LEAFLET
carefully before using the machine. Make sure you have understood them before operating the machine.
Keep both sets of instructions for future reference.
1. SAFETY GUIDELINES FOR THIS MACHINE
• Do not touch the moving parts.
• Be careful as the machine can reach high temperatures.
• Do not touch hot parts.
• Always hold the machine with both hands during operation.
• Do not lean over the machine while it is hot.
• Always ensure there is enough cable and it will not obstruct you during the work process.
• The supplied compressed air must be free from oil, water, and solvents and must be filtered.
• Unplug the power plug before making any adjustments, changing accessories, or storing power tools.
• After use, park the power tool securely and let it cool completely before storing it. Otherwise, hot air exhaust can
cause damage.
• Check the connection cable before each startup.
• Never carry out repairs or maintenance while the machine is hot.
• Never use the machine near flammable or explosive materials.
• Do not work in wet areas or in the rain.
• Use protective gloves and do not touch the hot nozzle. There is a risk of burns.
• The machine may emit vapors during edge banding work.
• Always work in well-ventilated areas. Use a mask if recommended by the laser edge banding manufacturer.
• Always use hearing protection while operating the device. Loud noises can irreversibly damage your hearing.
• It is essential to read and comply with the safety measures indicated by the manufacturer of the adhesive you will
be using.
14 - PEBZeroline®
OPERATING INSTRUCTIONS
®
ZeroLine
ENGLISH
®