Removing A Battery; Installing A Battery; Running The Dell Diagnostics - Dell PRECISION PP01X System Information Manual

Removing a Battery

NOTICE: If you choose to replace the battery with the computer in standby
mode, you have only about 1 minute to complete the battery replacement
before the computer shuts down and loses any unsaved data.
Before removing the battery, ensure that the computer is turned off,
suspended in a power management mode, or connected to an electrical
outlet.
If the computer is docked, undock it.
1
Slide and hold the battery bay (or module bay) latch release on the
2
bottom of the computer, and then slide the battery from the bay.

Installing a Battery

Slide the battery into the bay until the latch release clicks.

Running the Dell Diagnostics

Dell provides a number of tools to help you if your computer does not
perform as expected. For information on these help tools, see your
User's Guide.
System Infor m ation Guide
25