Cypress CY8CKIT-064B0S2-4343W Manual page 6

Safety and Regulatory Compliance Information
CY8CKIT-064B0S2-4343W PSoC 64 "Secure Boot" Wi-Fi BT Pioneer Kit Guide, Document Number: 002-29286 Rev. *E
Arrow.com.
Downloaded from
Regulatory Compliance Information
Contains Transmitter Module FCC ID: VPYLB1DX and IC: 772C-LB1DX
This kit is intended to use for ENGINEERING DEVELOPMENT, DEMONSTRATION, OR
EVALUATION PURPOSES ONLY and is not considered by Cypress Semiconductor to be a finished
end product fit for general consumer use. It generates, uses, and can radiate radio frequency energy
and has not been tested for compliance with the limits of computing devices pursuant to part 15 of
FCC or ICES-003 rules, which are designed to provide reasonable protection against radio
frequency interference. Operation of the equipment may cause interference with radio
communications, in which case the user at his own expense will be required to take whatever
measures may be required to correct this interference.
Due to change in the antenna pattern/type and gain used in CY8CKIT-064B0S2-4343W PSoC
"Secure Boot" Wi-Fi BT Pioneer Kit, class II permissive changes are required to recertify this kit. The
radiated emission tests must be performed again to obtain a new FCC ID for this host kit. Most
conducted RF test results may still be reused. Customer also needs to take their product through
other FCC/ISED testing such as unintentional radiators (FCC sub part 15B) and any other required
regional product certifications including but not limited to EU directives. Refer
Certification Guide by Murata on information on pre-certified and reference certified module
concepts and information on what additional test are required for FCC certification. Customer should
consult a Telecommunication Certification Body (TCB) lab for guidance on other requirements for the
device certification.
For more details on Murata Type 1DX module refer https://wireless.murata.com/type-1dx.html.
PSoC 64 "Secure Boot" Wi-Fi BT Pioneer Boards contain electrostatic
discharge (ESD) sensitive devices. Electrostatic charges readily
accumulate on the human body and any equipment, which can cause
a discharge without detection. Permanent damage may occur on
devices subjected to high-energy discharges. Proper ESD precautions
are recommended to avoid performance degradation or loss of
functionality. Store unused PSoC 64 "Secure Boot" Wi-Fi BT Pioneer
Boards in the protective shipping package.
End-of-Life/Product Recycling
The end-of-life cycle for this kit is five years from the date of
manufacture mentioned on the back of the box. Contact your nearest
recycler to discard the kit.
®
64
FCC Regulatory
5