RoboLabs Mini Robopop 25 Instruction Manual page 17

6 Technical service
ALWAYS unplug while servicing.
•
• Technical maintenance and repair MUST be conducted by a qualified technician only.
• A warning tag (DO NOT TURN ON! WORK IN PROGRESS!) must be placed at the switchboard
during servicing.
Internal surfaces are hot. Touching hot surfaces might cause burn. ALWAYS wait until cooled
•
down before servicing.
ALWAYS wear safety googles while servicing.
•
6.1 Technical maintenance
To provide good and safe operation of the machine, it is a must to conduct technical
maintenance on regular basis, and operating repair, as needed.
Technical maintenance — scope of work, which goal is to maintain the machine in operable
condition during intended use.
Operating repair — scope of work, which goal is to recover the machine or its parts in case of
malfunction, and renewal of its resource.
Technical maintenance stage 1 must be conducted every 360 hours of machine's
•
operation.
• Technical maintenance stage 2 must be conducted every 1000 hours of machine's
operation.
• Operating repair must be performed as needed.
It is a must to conduct technical maintenance while performing operating repair.
16