ADLINK Technology IMB-M47H User Manual page 44

7.3.2 Advanced > Power & Performance > CPU – Power Management Control
Feature
Intel SpeedStep
Turbo Mode
C states
Enhanced C-state
Package C state limit
7.3.3 Advanced > PCH-FW Configuration
Feature
ME Firmware Version
ME Firmware Mode
ME Firmware SKU
ME Firmware Status 1
ME Firmware Status 2
ME Firmware Status 3
ME Firmware Status 4
ME Firmware Status 5
ME Firmware Status 6
ME State
ME UnLock Control
36
Options Description
Allows more than two frequency ranges to be supported.
Disabled
Enabled
Disabled Enable/Disable processor Turbo Mode.
Enabled
Enables/Disables CPU Power Management. Allows CPU to go to C
Disabled
States when it's not 100% utilized.
Enabled
Enables or Disables C1E. When enabled, CPU will switch to minimum
Disabled
speed when all cores enter C- State.
Enabled
Maximum Package C State Limit Setting. CPU Default: Leaves to
C0/C1
Factory default value. Auto: Initializes to deepest available Package C
C2
State Limit.
C3
Auto
Options Description
Info Only PCH Firmware Version
Info Only PCH Firmware Mode
Info Only PCH Firmware SKU
Info Only PCH Firmware Status
Info Only PCH Firmware Status
Info Only PCH Firmware Status
Info Only PCH Firmware Status
Info Only PCH Firmware Status
Info Only PCH Firmware Status
Disabled When Disabled ME will be put into ME Temporarily Disabled Mode.
Enabled
ME Unlock control function.
Lock
Unlock
Set UnLock will system shutdown for active function.
6BBIOS Setup