Download Print this page
ADLINK Technology IMB-M47H User Manual

ADLINK Technology IMB-M47H User Manual

Industrial atx motherboard with 12th gen intel core i9/i7/i5/i3 processors and intel h610e chipset

Advertisement

Quick Links

Industrial ATX Motherboard with 12th Gen Intel® Core™ i9/i7/i5/i3 Processors
IMB-M47H
User's Manual
®
and Intel
H610E Chipset
Manual Rev.:
1.0
Revision Date:
January 13, 2023
Part Number:
50M-00106-1000

Advertisement

loading
Need help?

Need help?

Do you have a question about the IMB-M47H and is the answer not in the manual?

Questions and answers

Summary of Contents for ADLINK Technology IMB-M47H

  • Page 1 IMB-M47H User’s Manual Industrial ATX Motherboard with 12th Gen Intel® Core™ i9/i7/i5/i3 Processors ® and Intel H610E Chipset Manual Rev.: Revision Date: January 13, 2023 Part Number: 50M-00106-1000...
  • Page 2 Preface Copyright Copyright 2023 ADLINK Technology, Inc. This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer.
  • Page 3 IMB-M47H Revision History Revision Description Date Initial release 2023-01-13 Preface...
  • Page 4 Table of Contents Preface ..........................ii List of Figures ........................vi List of Tables ........................vii Introduction ........................ 1 Packing List ........................ 1 Optional Accessories ....................1 Specifications ......................3 Core System ....................... 3 I/O Interface ........................ 3 Graphics ........................4 Audio ...........................
  • Page 5 IMB-M47H BIOS Setup ....................... 33 Menu Structure ......................33 Main Menu ....................... 34 Advanced Menu ....................... 35 Chipset Menu ......................43 Security Menu ......................49 Boot Menu ........................ 50 Save & Exit Menu ..................... 51 Safety Instructions ......................52 Getting Service ......................... 53...
  • Page 6 List of Figures Figure 1: Functional Block Diagram ......................5 Figure 2: IO Panel Connector Locations ....................7 Figure 3: Onboard Connector Locations ....................8 Figure 4: Mechanical Dimensions - Board .....................10 Figure 5: Mechanical Dimensions - IO Panel ..................10 Preface...
  • Page 7 IMB-M47H List of Tables Table 1: IO Panel Connector Definitions ....................7 Table 2: Onboard Connector Definitions ....................9 Table 3: Onboard Jumper and Switch Definitions ..................9 Table 4: Jumper and Switch Definitions ....................20 Table 5: System Memory Map .......................27 Table 6: IO Map ............................27 Table 7: IRQ Lines PIC Mode.........................29...
  • Page 8 This page intentionally left blank. viii Preface...
  • Page 9 PCIe Gen 5, USB 3.2 Gen 1 x1 (5 Gbps), and SATA 6 Gb/s, dual-channel DDR5 memory up to 64 GB in two DIMM slots for industrial automation applications, the IMB-M47H offers a significant competitive advantage for embedded computing applications. The rugged I/O design enhances system flexibility with robust device compatibility, durable connectivity, and extreme environment readiness.
  • Page 10 This page intentionally left blank. Introduction...
  • Page 11 IMB-M47H 2 Specifications Core System  CPU: 12th Generation Intel® Core™ i9/i7/i5/i3 Desktop Processor • Intel® Core™ i9-12900E, up to 5.00 GHz, 16 Core, 30M Cache, DDR5 4800 MT/s support, 65W • Intel® Core™ i9-12900TE, up to 4.80 GHz, 16 Core, 30M Cache, DDR5 4800 MT/s support, 35W •...
  • Page 12  • 4x USB 3.2 Gen 1 x1 ports (5Gbps, rear I/O) • 2x USB 2.0 ports (rear I/O) • 1x USB 2.0 vertical Type A port for internal dongles • 2x USB 2.0 via header  COM: 2x RS-232/422/485 (rear I/O), 4x RS-232 pin headers ...
  • Page 13 IMB-M47H Functional Block Diagram Figure 1: Functional Block Diagram Specifications...
  • Page 14 This page intentionally left blank. Specifications...
  • Page 15 IMB-M47H 3 Mechanical Layout IO Panel Connector Locations Figure 2: IO Panel Connector Locations Table 1: IO Panel Connector Definitions IO Panel Connectors Item Description VGA Connector HDMI Port DisplayPort KB/MS PS/2 Port USB 2.0 Port #7 USB 2.0 Port #8...
  • Page 16 Onboard Connectors, Jumpers and Switch Locations P/J9 J7 J8 Figure 3: Onboard Connector Locations Mechanical Layout...
  • Page 17 IMB-M47H Table 2: Onboard Connector Definitions Onboard Connectors Item Description Remarks USB 2.0 Box Header USB56 PCI Slot PCI1-4 SATA Connectors SATA1-3 Serial Port Header COM3-6 Parallel Port Header LPT1 Front Panel Audio Header FP_AUDIO1 Chassis Intrusion Header JCASE1 CPU FAN Header (4-pin)
  • Page 18 Mechanical Dimensions Top View Dimensions: mm Figure 4: Mechanical Dimensions - Board Side View Dimensions: mm Figure 5: Mechanical Dimensions - IO Panel Mechanical Layout...
  • Page 19 IMB-M47H 4 Connector Pinouts See 3.1 Connector Locations on page 7 for connector locations. IO Panel Connectors 4.1.1 HDMI Connector Signal Signal HDMI1_CON_DP2 HDMI1_CON_DN2 HDMI1_CON_DP1 HDMI1_CON_DN1 HDMI1_CON_DP0 HDMI1_CON_DN0 HDMI1_CON_CKP HDMI1_CON_CKN HDMI1_DDC_CLK HDMI1_DDC_DATA +5V_HDMI HDMI1_CON_HPD 4.1.2 VGA Connector Signal Signal VGA_CON_RED...
  • Page 20 4.1.3 USB Connectors USB 3.0, USB 2.0 Signal +5 VDC USB D- USB2.0 USB D+ Signal +5V_USB12 USB_CM_N1 9 8 7 6 5 USB_CM_P1 1 2 3 4 USB3_RX_CM_N1 USB3.0 USB3_RX_CM_P1 USB3_TX_CM_N1 USB3_TX_CM_P1 4.1.4 PS/2 Combo Connector Signal KB_DAT MS_DAT +5V_DUAL KB_CLK MS_CLK...
  • Page 21 IMB-M47H 4.1.5 COM 1-2 Stacked Connector Top connector COM1, bottom connector COM2 Signal RS-232 RS-422 RS-485 DCD# Tx/Rx- Tx/Rx+ DTR# DSR# RTS# CTS# 4.1.6 Ethernet Connectors (LAN1, LAN2) Dual Ethernet controllers based on Intel® i219LM/i225V, support PXE and WOL over both LANs.
  • Page 22 Onboard Connectors See 3.2 Onboard Connectors, Jumpers and Switch Locations on page 8 for connector locations. 4.2.1 USB2.0 Box Header (USB56) Signal Signal +5V DC +5V DC Ground Ground KEY (no pin) No Connect/OC 4.2.2 PCI Connector (PCI1-PCI4) The PCI connector on Expansion Slot #2, #5~#7 supports single-slot and a bus master PCI expansion cards. 4.2.3 SATA Connectors (SATA1-SATA3) Signal...
  • Page 23 IMB-M47H 4.2.5 Parallel Port Header (LPT1) Signal Signal STB# AFD# DATA0 ERR# DATA1 INIT# DATA2 SLIN# DATA3 DATA4 DATA5 DATA6 DATA7 ACK# BUSY SLCT 4.2.6 Front Panel Audio Header (FP_AUDIO1) Signal Signal [Port 2] SENSE_RETURN_B Line-In Port2 Left Line-In Port2 Right...
  • Page 24 4.2.9 Front Panel Header (F_PANEL1) Signal In/Out Description Signal In/Out Description HDD Activity LED Power LED HDD_LED+ Hard disk LED PLED_PWR Power LED pull-up to +3.3 V pull-up to +3.3_DUAL HDD_LED# Hard disk active SUPLED Front panel active LED Ground Ground PANSWIN# Power switch...
  • Page 25 IMB-M47H 4.2.12 Processor Power Supply Connector (ATX12V1) (ATX12V2) Signal Signal Ground +12V Ground +12V Ground +12V Ground +12V Signal Signal Ground +12V Ground +12V 4.2.13 Debug Header (ESPI1) Signal Signal ESPI_DEG_CLK_R 2 ESPI_DEG_IO1 ESPI_RESET#_R ESPI_DEG_IO0 ESPI_CS# +3.3V ESPI_DEG_IO3 ESPI_DEG_IO2 +3.3V_DUAL 4.2.14...
  • Page 26 4.2.15 GPIO (JDIO1) Signal Signal DIO1 DIO17 DIO2 DIO18 DIO3 DIO19 DIO4 DIO20 DIO5 DIO21 DIO6 DIO22 DIO7 DIO23 DIO8 DIO24 DIO9 DIO25 DIO10 DIO26 DIO11 DIO27 DIO12 DIO28 DIO13 DIO29 DIO14 DIO30 DIO15 DIO31 DIO16 DIO32 POWER 4.2.16 JSETCOM1/JSETCOM2 Signal Signal UART1_RXD...
  • Page 27 IMB-M47H 4.2.17 M.2 2280 Slot (M2M1) Signal Signal +3.3V_DUAL +3.3V_DUAL M2_PCIE3_RX_N8 M2_PCIE3_RX_P8 M2_PCH_SSD_LED# M2_PCIE3_TX_C_N8 +3.3V_DUAL M2_PCIE3_TX_C_P8 +3.3V_DUAL +3.3V_DUAL M2_PCIE3_RX_N7 +3.3V_DUAL M2_PCIE3_RX_P7 M2_PCIE3_TX_C_N7 M2_PCIE3_TX_C_P7 M2_PCIE3_RX_N6 M2_PCIE3_RX_P6 M2_PCIE3_TX_C_N6 M2_PCIE3_TX_C_P6 SSD_SATA_DEVSLP_R SATA_PE_RX_N0 SATA_PE_RX_P0 SATA_PE_TX_N0 SATA_PE_TX_P0 PCIE_M2M_RST# M2M_CLKREQ#_R CK_100M_N11 M2_PCH_WAKE# CK_100M_P11 Mechanical Key (M-Key)
  • Page 28 Jumper and Switch Settings See 3.2 Onboard Connectors, Jumpers and Switch Locations on page 8 for jumper and switch locations. Table 4: Jumper and Switch Definitions Jumper Block Item Description Remarks JCMOS1 Clear CMOS. Normal (Default) One 1x3 2.0mm pin header 1-2 (default) = Normal, 2-3 = Clear CMOS Clear CMOS JCOMPWR1...
  • Page 29 IMB-M47H Jumper Block JSETCOM1 One 2x9 2.0mm pin header RS232 RS422 RS485 JSETCOM2 RS232: 5-6, 7-9, 8-10, 13-15, 14-16 (default) RS422: 3-4, 9-11, 10-12, 15-17, 16-18 RS485: 1-2, 9-11, 10-12, 15-17, 16-18 COM1_S1-S4 COM1 master/slave and RS-232 terminal selection RS-485...
  • Page 30 Jumper Block JPW2 Power selection for JSMB1 power pin. NC (Default) One 2x3 2.0mm pin header NC (default)/+5V/+3.3V +3.3V JPW3 Power selection for JDIO1 power pin. NC (Default) One 2x3 2.0mm pin header NC (default)/+5V/+12V +12V JSMB2 One 1x4 2.0mm pin header. Pin 1: Power with JPW1 Pin 2: SMB_DAT_MAIN Pin 3: SMB_CLK_MAIN...
  • Page 31 IMB-M47H Jumper Block JSMB1 One 1x3 2.54mm pin header for CPU PWM firmware burn-in. Use debug only. Pin 1: VR_+VCORE_SCL Pin 2: GND Pin 3: VR_+VCORE_SDAL PCIEX4 Slot & M.2 Config. SW1. SW1 (1) SW1 (2) M.2 (default) PCIEX4 (SWITCH ON)
  • Page 33 IMB-M47H 5 Driver Installation Download the requisite drivers for your system from the IMB-M47H product page at: https://www.adlinktech.com/Products/Industrial_Motherboards_SBCs/ATXMotherboards/IMB-M47H Driver Installation...
  • Page 34 This page intentionally left blank. Driver Installation...
  • Page 35 IMB-M47H 6 System Resources System Memory Map Table 5: System Memory Map Address Range Address Range Size Description (4GB-2MB) FFE00000 – FFFFFFFF 2 MB High BIOS Area (4GB-18MB) – (4GB-17MB-1) FEE00000 – FEEFFFFF 1 MB MSI Interrupts (4GB-20MB) – (4GB-19MB-1) FEC00000 –...
  • Page 36 Hex Range Device 0063-0063 Motherboard resources 0065-0065 Motherboard resources 0067-0067 Motherboard resources 0070-0070 Motherboard resources 0080-0080 Motherboard resources 0092-0092 Motherboard resources 00B2-00B3 Motherboard resources 0680-069F Motherboard resources FFFF-FFFF Motherboard resources 1800-18FE Motherboard resources 164E-164F Motherboard resources 0040-0043 System timer 0050-0053 System timer 0070-0077 System CMOS/real time clock...
  • Page 37 IMB-M47H Interrupt Request (IRQ) Lines 6.3.1 IRQ Lines PIC Mode Table 7: IRQ Lines PIC Mode IRQ# Device System timer COM2 COM1 COM3, COM4 System CMOS/real time clock COM5, COM6 Numeric data processor Intel Serial IO GPIO Host Controller Intel Chipset Smbus HD Audio Controller Note: These IRQs can be used for PCI devices when onboard device is disabled.
  • Page 38 PCI Features 6.4.1 PCI Configuration Space Map Table 9 PCI Configuration Space Map Device Function Routing Description Number Number Number Intel Host Bridge Internal Intel VGA Controller Internal Intel USB 3.0 XHCI Internal Intel Data acquisition/signal process Internal Intel Communication device Internal Intel AHCI 1.0 controller Internal...
  • Page 39 IMB-M47H 6.4.2 PCI Interrupt Routing Map Table 10 PCI Interrupt Routing Map LpcBridge High SMBus PCIE Root PCIE Root PCIE Root Line Definition Port #9 Port #5 Port #12 Audio (LAN1) (PCIE x4) (ITE8892) Int0 INTA:16 INTA:16 INTA:16 INTA:16 INTA:16...
  • Page 40 This page intentionally left blank. System Resources...
  • Page 41 IMB-M47H 7 BIOS Setup Menu Structure This section presents the primary menus of the BIOS Setup Utility. Use the following table as a quick reference for the contents of the BIOS Setup Utility. The subsections describe the submenus and options for each menu item. The default options are presented in bold, and the function of each setting is described in the right hand column of the table.
  • Page 42 Main Menu The Main Menu provides read-only information about your system and also allows you to set the System Date and Time. Refer to the tables below the screen shot of this menu for details of the submenus and settings. 7.2.1 Main >...
  • Page 43 IMB-M47H Advanced Menu This menu contains the settings for most of the user interfaces in the system. 7.3.1 Advanced > CPU Configuration Feature Options Description Performance-core Info Only Displays the P-core Information Information Frequency Info Only xxxx MHz L1 Data Cache...
  • Page 44 7.3.2 Advanced > Power & Performance > CPU – Power Management Control Feature Options Description Intel SpeedStep Allows more than two frequency ranges to be supported. Disabled Enabled Turbo Mode Disabled Enable/Disable processor Turbo Mode. Enabled C states Enables/Disables CPU Power Management. Allows CPU to go to C Disabled States when it’s not 100% utilized.
  • Page 45 IMB-M47H 7.3.4 Advanced > Trusted Computing Feature Options Description Security Device Enables or Disables BIOS support for security device. O.S. will Disable Support not show Security Device. TCG EFI protocol and INT1A interface Enable will not be available. SHA256 PCR Bank...
  • Page 46 7.3.7 Advanced > NCT6126D Super IO Configuration > Serial Port 1 Configuration Feature Options Description Serial Port Disabled Enable or Disable Serial Port (COM) Enabled Device Settings Serial Port device settings IO=3F8h IRQ=4 Change Settings Selects optimal setting for Super IO Device Auto RS485 Auto Flow Enables or Disables RS485 Auto Flow Control Function (Make sure to set...
  • Page 47 IMB-M47H 7.3.11 Advanced > NCT6126D SUPER IO Configuration > Serial Port 5 Configuration Feature Options Description Serial Port Disabled Enables or Disables Serial Port (COM) Enabled Device Settings IO=220h; IRQ=6 Serial Port device settings Change Settings Selects optimal settings for Super IO Device Auto 7.3.12...
  • Page 48 7.3.15 Advanced > Hardware Monitor Feature Options Description Smart Fan Function Disabled Enables or Disables Smart Fan Function Enabled Smart Fan Mode Configuration► Submenu Smart Fan Mode Configuration 7.3.16 Advanced > Hardware Monitor > Smart Fan > Smart Fan Mode Configuration – SMART FAN IV Mode Feature Options...
  • Page 49 IMB-M47H 7.3.18 Advanced > S5 RTC Wake Settings Feature Options Description Wake System From S5 Enables or Disables System wake on alarm event. Disabled Enabled 7.3.19 Advanced > Serial Port Console Redirection Feature Options Description COM1 Console Redirection Disabled Enables or Disables Console Redirection...
  • Page 50 7.3.21 Advanced > USB Configuration Feature Options Description USB Devices Show current USB devices USB Mass Storage Driver Enable/Disable USB Mass Storage Driver Support Enabled Support Disabled 7.3.22 Advanced > Network Stack Configuration Feature Options Note Network Stack Disabled Enables or Disables UEFI Network Stack. Enabled 7.3.23 Advanced >...
  • Page 51 IMB-M47H Chipset Menu This menu contains settings for other user interfaces in the system. 7.4.1 Chipset > System Agent (SA) Configuration Feature Options Description VT-d Capability Info Only Submenu Memory Configuration Parameters Memory Configuration Submenu Graphics Configuration Graphics Configuration Submenu...
  • Page 52 7.4.3 Chipset > System Agent (SA) Configuration > Graphics Configuration Feature Options Description Auto Primary Display Selects which of IGFX/PEG/PCIE Graphics device should be IGFX Primary Display PEG Slot PCIE Internal Graphics Keeps IGFX enabled based on the setup options. Auto Disabled Enabled...
  • Page 53 IMB-M47H 7.4.5 Chipset > PCH-IO Configuration Feature Options Description PCI Express Configuration Submenu PCI Express Configuration settings SATA Configuration Submenu SATA Device Options Setting USB Configuration Submenu USB Configuration settings HD Audio Configuration Submenu HD Audio Subsystem Configuration Settings Serial IO Configuration...
  • Page 54 7.4.7 Chipset > PCH-IO Configuration > PCI Express Configuration > PCI Express Root Port 3 Feature Options Description PCI Express Root Port 3 Disabled Control the PCI Express Root Port. Enabled ASPM 3 Auto Sets the ASPM Level: Force L1 – Force all link to L1 State Disabled AUTO –...
  • Page 55 IMB-M47H 7.4.9 Chipset > PCH-IO Configuration > PCI Express Configuration > PCI Express Root Port 5 Feature Options Description PCI Express Root Port 5 Disabled Control the PCI Express Root Port. Enabled ASPM 5 Auto Sets the ASPM Level: Force L1 – Force all link to L1 State Disabled AUTO –...
  • Page 56 7.4.11 Chipset > PCH-IO Configuration > USB Configuration Feature Options Description USB12 Standby Power Support Disabled Enable/Disable USB standby power Enabled USB34 Standby Power Support Disabled Enable/Disable USB standby power Enabled USB56 Standby Power Support Disabled Enable/Disable USB standby power Enabled USB78 Standby Power Support Disabled...
  • Page 57 IMB-M47H Security Menu Feature Options Description Administrator Password Enter password Set Administrator Password User Password Enter password Set User Password 6BBIOS Setup...
  • Page 58 Boot Menu Feature Options Description Boot Configuration Info Only Setup Prompt Timeout 1 (seconds) Number of seconds to wait for setup activation key. 65535(0xFFFF) means infinite waiting. Bootup NumLock State Select the keyboard NumLock state. Quiet Boot Disabled Enables or Disables Quiet Boot option Enabled UEFI Boot mode select...
  • Page 59 IMB-M47H Save & Exit Menu Save & Exit Options Note Save Changes and Exit Exits system setup after saving the changes. Discard Changes and Exit Exits system setup without saving any changes. Save Changes and Reset Resets the system after saving the changes.
  • Page 60 Safety Instructions Read and follow all instructions marked on the product and in the documentation before you operate your system. Retain all safety and operating instructions for future use. • Please read these safety instructions carefully. • Please keep this User‘s Manual for later reference. •...
  • Page 61 6450 Via Del Oro, San Jose, CA 95119-1208, USA Tel: +1-408-360-0200 Toll Free: +1-800-966-5200 (USA only) Fax: +1-408-600-1189 Email: info@adlinktech.com ADLINK Technology (China) Co., Ltd. Address: 300 Fang Chun Rd., Zhangjiang Hi-Tech Park, Pudong New Area, Shanghai, 201203 China Tel: +86-21-5132-8988 Fax: +86-21-5132-3588 Email: market@adlinktech.com...