RoboLabs RoboJetFloss Instruction Manual page 4

1 Safety requirements
This is the safety alert symbol. It is used to alert you to potential physical injury hazards. Obey all
safety messages that follow this symbol to avoid possible injury or death.
• Not grounded machine can cause electric shock. Power outlet MUST HAVE proper grounding
to avoid electric shock.
DO NOT use excessive water or water jet for machine cleaning. DO NOT spill water on
•
electric panels or parts. Using excessive water during cleaning can cause short circuit and
electric shock.
DO NOT USE any kind of adapters, inverters, or extension cords, as it might affect the overall
•
performance of the machine, and impose additional risks.
DO NOT allow supply cord to be twisted, bent, pulled, contacted with sharp edges, or to be
•
mechanically impacted in any other way.
• DO NOT immerse machine and/or supply cord into water.
ALWAYS unplug machine before cleaning or servicing.
•
No user serviceable parts inside electric panel. DO NOT open electric panel unless you are
•
qualified for this.
• Spinning head is very hot while in operation. DO NOT touch until it cools down.
• DO NOT leave working machine unattended.
DO NOT use machine in other way than intended.
•
• DO NOT cover ventilation holes on housing.
• It is a MUST to provide free access, at any time, to wall receptacle, and switchboard to which
the receptacle is connected.
• Fast spinning head can crush your fingers. DO NOT TOUCH the spinning head until it
completely stops.
Foreign objects in the spinning head may cause eye injury to operator and/or other people.
•
DO NOT put inside anything except sugar.
• Refilling the spinning head while it is spinning might cause eye injury. DO NOT refill the
spinning head until it completely stops.
Excessive sugar in the spinning head may cause eye injury to operator and/or other people.
•
DO NOT OVERFILL spinning head with sugar. ALWAYS wait spinning head to stop spinning
before sugar refilling.
• Improper installation, adjustment, alteration, service or maintenance can cause property
damage, injury, or death. Read and understand this manual before use.
Only instructed personnel is allowed to operate the machine.
•
3