Ad-Server Commands; Ldap-Server Commands - ZyXEL Communications ZYWALL USG CLI Reference Manual

Chapter 28 AAA Server

28.2.1 ad-server Commands

The following table lists the
Table 134 ad-server Commands
COMMAND
show ad-server
[no] ad-server basedn basedn
[no] ad-server binddn binddn
[no] ad-server cn-identifier uid Sets the unique common name (cn) to identify a record.
[no] ad-server host ad_server
[no] ad-server password password Sets the bind password. The
[no] ad-server port port_no
[no] ad-server search-time-limit
time
[no] ad-server ssl

28.2.2 ldap-server Commands

The following table lists the
server.
Table 135 ldap-server Commands
COMMAND
show ldap-server
[no] ldap-server basedn basedn
[no] ldap-server binddn binddn
[no] ldap-server cn-identifier
uid
[no] ldap-server host
ldap_server
[no] ldap-server password
password
[no] ldap-server port port_no
230
commands you use to set the default AD server.
ad-server
DESCRIPTION
Displays current AD server settings.
Sets a base distinguished name (DN) for the default AD server. A
base DN identifies an AD directory. The
setting.
Sets the user name the ZyWALL uses to log into the default AD
server.
The no command clears this setting.
The command clears this setting.
no
Sets the AD server address. Enter the IP address (in dotted decimal
notation) or the domain name. The
Sets the AD port number. Enter a number between 1 and 65535. The
default is 389. The no command clears this setting.
Sets the search timeout period (in seconds). Enter a number between
1 and 300. The no command clears this setting.
Enables the ZyWALL to establish a secure connection to the AD
server. The no command disables this feature.
commands you use to set the default LDAP
ldap-server
DESCRIPTION
Displays current LDAP server settings.
Sets a base distinguished name (DN) for the default LDAP server. A
base DN identifies an LDAP directory. The
setting.
Sets the user name the ZyWALL uses to log into the default LDAP
server.
The no command clears this setting.
Sets the unique common name (cn) to identify a record.
The no command clears this setting.
Sets the LDAP server address. Enter the IP address (in dotted decimal
notation) or the domain name. The
Sets the bind password. The
Sets the LDAP port number. Enter a number between 1 and 65535. The
default is 389. The command clears this setting.
no
no command clears this
command clears this setting.
no
no command clears this setting.
no command clears this
no command clears this setting.
no command clears this setting.
ZyWALL (ZLD) CLI Reference Guide