Debug Log Commands - ZyXEL Communications ZYWALL USG CLI Reference Manual

36.1.3 Debug Log Commands

This table lists the commands for the debug log settings.
Table 169 logging Commands: Debug Log Settings
COMMAND
show logging debug status
show logging debug entries [priority pri]
[category module_name] [srcip ip] [dstip ip]
[service service_name] [begin <1..512> end
<1..512>] [keyword keyword]
show logging debug entries field field [begin
<1..1024> end <1..1024>]
[no] logging debug suppression
[no] logging debug suppression interval
<10..600>
clear logging debug buffer
This table lists the commands for the remote syslog server settings.
Table 170 logging Commands: Remote Syslog Server Settings
COMMAND
show logging status syslog
[no] logging syslog <1..4>
[no] logging syslog <1..4> address {ip |
hostname}
[no] logging syslog <1..4> {disable | level
normal | level all}
[no] logging syslog <1..4> facility {local_1 |
local_2 | local_3 | local_4 | local_5 | local_6
| local_7}
[no] logging syslog <1..4> format {cef | vrpt} Sets the format of the log information.
ZyWALL (ZLD) CLI Reference Guide
DESCRIPTION
Displays the current settings for the debug log.
Displays the selected entries in the debug log.
pri: alert | crit | debug | emerg | error | info | notice
| warn
keyword: You can use alphanumeric and
:=?!*#@$_%- characters, and it can be up to 63
characters long.This searches the message,
source, destination, and notes fields.
Displays the selected fields in the debug log.
field: time | msg | src | dst | note | pri | cat | all
Enables log consolidation in the debug log. The
command disables log consolidation in the debug
log.
Sets the log consolidation interval for the debug
log. The no command sets the interval to ten.
Clears the debug log.
DESCRIPTION
Displays the current settings for the remote
servers.
Enables the specified remote server. The
command disables the specified remote server.
Sets the URL or IP address of the specified remote
server. The no command clears this field.
hostname: You may up to 63 alphanumeric
characters, dashes (-), or periods (.), but the first
character cannot be a period.
Specifies what kind of information, if any, is logged
for the specified category.
Sets the log facility for the specified remote server.
The command sets the facility to local_1.
no
cef: Common Event Format, syslog-compatible
format.
vrpt: ZyXEL's Vantage Report, syslog-compatible
format.
Chapter 36 Logs
()+/
no
no
293