Console Port - ZyXEL Communications ZYWALL USG CLI Reference Manual

Chapter 1 Command Line Interface
The ZyWALL might force you to log out of your session if reauthentication
time, lease time, or idle timeout is reached. See
more information about these settings.

1.2.1 Console Port

The default settings for the console port are as follows.
Table 1 Managing the ZyWALL: Console Port
SETTING
Speed
Data Bits
Parity
Stop Bit
Flow Control
When you turn on your ZyWALL, it performs several internal tests as well as line
initialization. You can view the initialization information using the console port.
• Garbled text displays if your terminal emulation program's speed is set lower than the
ZyWALL's.
• No text displays if the speed is set higher than the ZyWALL's.
• If changing your terminal emulation program's speed does not get anything to display,
restart the ZyWALL.
• If restarting the ZyWALL does not get anything to display, contact your local customer
support.
Figure 1 Console Port Power-on Display
FLASH: AMD 16M
BootModule Version: V1.08 | 12/04/2007 15:36:17
DRAM: Size = 256 Mbytes
DRAM POST: Testing: 262144K
After the initialization, the login screen displays.
Figure 2 Login Screen
Welcome to ZyWALL 1050
Username:
12
VALUE
115200 bps
8
None
1
Off
Chapter 24 on page 211
ZyWALL (ZLD) CLI Reference Guide
for