ZyXEL Communications ZYWALL USG CLI Reference Manual page 192

Chapter 22 Anti-Spam
Table 107 Input Values for White and Black list Anti-Spam Commands (continued)
LABEL
rule_number
subject
Use the white list to identify legitimate e-mail and the black list to identify spam e-mail. The
following table describes the commands for configuring the white list and black list. You must
use the
configure terminal
these commands.
Table 108 Commands for Anti-spam White and Black Lists
COMMAND
[no] anti-spam white-list activate
[no] anti-spam white-list [rule_number]
ip-address ip subnet_mask
{activate|deactivate}
[no] anti-spam white-list [rule_number]
e-mail email {activate|deactivate}
[no] anti-spam white-list [rule_number]
mail-header mail-header mail-header-
value {activate|deactivate}
[no] anti-spam white-list [rule_number]
subject subject {activate|deactivate}
[no] anti-spam black-list activate
[no] anti-spam black-list [rule_number]
ip-address ip subnet_mask
{activate|deactivate}
[no] anti-spam black-list [rule_number]
e-mail email {activate|deactivate}
[no] anti-spam black-list [rule_number]
mail-header mail-header mail-header-
value {activate|deactivate}
[no] anti-spam black-list [rule_number]
subject subject {activate|deactivate}
anti-spam tag black-list [tag]
show anti-spam white-list [status]
192
DESCRIPTION
The index number of an anti-spam white or black list entry. 1 - X where X is
the highest number of entries the ZyWALL model supports. See the
ZyWALL's User's Guide for details.
A keyword in the content of the e-mail Subject headers. Use up to 63 ASCII
characters. Spaces are not allowed, although you could substitute a
question mark (?). See Section 22.2.3.2 on page 193
command to enter the configuration mode before you can use
DESCRIPTION
Turns the white list checking on or off. Turn on the white list
to forward e-mail that matches (an active) white list entry
without doing any more anti-spam checking on that
individual e-mail.
Adds, edits, or removes a white list entry to check e-mail for
a specific source or relay IP address. Also turns the entry
on or off.
Adds, edits, or removes a white list entry to check e-mail for
a specific source e-mail address or domain name. Also
turns the entry on or off.
Adds, edits, or removes a white list entry to check e-mail for
specific header fields and values. Also turns the entry on or
off.
Adds, edits, or removes a white list entry to check e-mail for
specific content in the subject line. Also turns the entry on
or off.
Turns the black list checking on or off. Turn on the black list
to treat e-mail that matches (an active) black list entry as
spam.
Adds, edits, or removes a black list entry to check e-mail for
a specific source or relay IP address. Also turns the entry
on or off.
Adds, edits, or removes a black list entry to check e-mail for
a specific source e-mail address or domain name. Also
turns the entry on or off.
Adds, edits, or removes a black list entry to check e-mail for
specific header fields and values. Also turns the entry on or
off.
Adds, edits, or removes a black list entry to check e-mail for
specific content in the subject line. Also turns the entry on
or off.
Configures a message or label (up to 15 ASCII characters)
to add to the mail subject of e-mails that match an anti-
spam black list entry.
Displays the current anti-spam white list. Use status to
show the activation status only.
for more details.
ZyWALL (ZLD) CLI Reference Guide