Ddns Commands Summary - ZyXEL Communications ZYWALL USG CLI Reference Manual

Chapter 10 DDNS

10.2 DDNS Commands Summary

The following table describes the values required for many DDNS commands. Other values
are discussed with the corresponding commands.
Table 51 Input Values for DDNS Commands
LABEL
profile_name
The following table lists the DDNS commands.
Table 52 ip ddns Commands
COMMAND
show ddns [profile_name]
[no] ip ddns profile profile_name
[no] service-type {dyndns | dyndns_static
| dyndns_custom | dynu-basic | dynu-
premium | no-ip | peanut-hull | 3322-dyn |
3322-static}
[no] username username password password
[no] host hostname
[no] ip-select {iface | auto | custom}
[no] ip-select-backup {iface | auto |
custom}
[no] custom ip
[no] backup-custom ip
[no] mx {ip | domain_name}
96
DESCRIPTION
The name of the DDNS profile. You may use 1-31 alphanumeric characters,
underscores( ), or dashes (-), but the first character cannot be a number. This
_
value is case-sensitive.
DESCRIPTION
Displays information about the specified DDNS
profile or about all DDNS profiles.
Creates the specified DDNS profile if necessary
and enters sub-command mode. The
deletes it.
Sets the service type in the specified DDNS profile.
The no command clears it.
Sets the username and password in the specified
DDNS profile. The no command clears these
fields.
username: You can use up to 31 alphanumeric
characters and the underscore (_).
password: You can use up to 64 alphanumeric
characters and the underscore (_).
Sets the domain name in the specified DDNS
profile. The no command clears the domain name.
hostname: You may up to 254 alphanumeric
characters, dashes (-), or periods (.), but the first
character must be alphanumeric.
Sets the IP address update policy in the specified
DDNS profile. The no command clears the policy.
Sets the alternate IP address update policy in the
specified DDNS profile. The
the policy.
Sets the static IP address in the specified DDNS
profile. The command clears it.
no
Sets the static IP address for the backup interface
in the specified DDNS profile. The
clears it.
Enables the mail exchanger and sets the fully-
qualified domain name of the mail server to which
mail from this domain name is forwarded. The
command disables the mail exchanger.
domain_name: You may up to 254 alphanumeric
characters, dashes (-), or periods (.), but the first
character must be alphanumeric.
ZyWALL (ZLD) CLI Reference Guide
no command
no command clears
command
no
no