User/Group Commands Summary; User Commands - ZyXEL Communications ZYWALL USG CLI Reference Manual

Chapter 24 User/Group

24.2 User/Group Commands Summary

The following table identify the values required for many
Other input values are discussed with the corresponding commands.
Table 120 username/groupname Command Input Values
LABEL
username
groupname
The following sections list the

24.2.1 User Commands

The first table lists the commands for users.
Table 121 username/groupname Commands Summary: Users
COMMAND
show username [username]
username username nopassword user-type {admin
| guest | limited-admin | user}
username username password password user-type
{admin | guest | limited-admin | user}
username username user-type ext-user
no username username
username rename username username
username username [no] description description Sets the description for the specified user. The
username username [no] logon-time-setting
<default | manual>
212
DESCRIPTION
The name of the user (account). You may use 1-31 alphanumeric characters,
underscores( ), or dashes (-), but the first character cannot be a number. This
_
value is case-sensitive.
The name of the user group. You may use 1-31 alphanumeric characters,
underscores( _ ), or dashes (-), but the first character cannot be a number. This
value is case-sensitive. It cannot be the same as the user name.
username/groupname
username/groupname
commands.
DESCRIPTION
Displays information about the specified user or
about all users set up in the ZyWALL.
Creates the specified user (if necessary), disables
the password, and sets the user type for the
specified user.
Creates the specified user (if necessary); enables
and sets the password; and sets the user type for
the specified user.
password: You can use 1-63 printable ASCII
characters, except double quotation marks (") and
question marks (?).
Creates the specified user (if necessary) and sets
the user type to Ext-User.
Deletes the specified user.
Renames the specified user (first username) to
the specified username (second username).
command clears the description.
description: You can use alphanumeric and
()+/:=?!*#@$_%- characters, and it can be up
to 60 characters long.
Sets the account to use the factory default lease
and reauthentication times or custom ones.
ZyWALL (ZLD) CLI Reference Guide
commands.
no