I05. What Is The Difference Between Bwm (Bandwidth Management) In Policy Route And App. Patrol - ZyXEL Communications ZYWALL 1050 Support Notes

ZyWALL 1050/ZyWALL USG 300 Support Notes
(2) It could be used when user want to apply bandwidth control for certain allowed or rejected
application (which is in Application Patrol support list).
(3) Since the "Service Port" performs up to OSI layer 4 inspections, so the system
performance would be better than the "Auto" inspection (layer 7). Therefore, if the user
concerns about system performance or user's network environment is simple, the "Service
Ports" setting could be the choice.
I05. What is the difference between BWM (bandwidth management) in Policy
Route and App. Patrol ?
There are two places to set BWM policies:
1. Policy Route – The rule of Policy Route supports Outbound BWM only.
2. App. Patrol – App. Patrol supports both Outbound BWM and Inbound BWM.
If a traffic matches the BWM rules of both Policy Route and App. Patrol, Policy route will
be applied on the traffic.
331
All contents copyright (c) 2007 ZyXEL Communications Corporation.