ZyXEL Communications ZYWALL 1050 Support Notes page 307

6. You can be connecting to ZyWALL 1050/ZyWALL USG 300 from a WAN interface
which is blocked by default. If you don't want this block rule, go to GUI menu
Configuration > System > WWW to set to accept the access from 'WAN' or from
'All'.
Then switch to menu Configuration > Policy > Firewall > To-ZyWALL rules to add
the HTTP access from WAN side.
Note: By default, Firewall blocks all the access except the traffic like VRRP, IPSec
ESP, IPSec AH, IPSec NATT, IPSec IKE.
A03. What's difference between "Admin Service Control" and "User Service
Control" configuration in GUI menu Configuration > System > WWW?
The "Admin Service Control" configuration is for controlling user login with admin user-type
to perform management task including Admin and Limited-Admin. And "User Service
Control" configuration table is for controlling user login with access user-type to perform user
access task including User and Guest.
A04. Why ZyWALL 1050/ZyWALL USG 300 redirects me to the login page when I
All contents copyright (c) 2007 ZyXEL Communications Corporation.
ZyWALL 1050/ZyWALL USG 300 Support Notes
307