ZyXEL Communications ZYWALL 1050 Support Notes page 247

ZyWALL 1050/ZyWALL USG 300 Support Notes
map any IP from the WAN port to our internal Web Server, which is 192.168.1.55. And in this
case, our web server is running on TCP 80, therefore, we pick TCP 80 for our mapping.
CLI to create a Virtual Server Mapping
[0] ip virtual-server WebServer interface ge2 original-ip any
map-to 192.168.1.55 map-type port protocol tcp original-port 80
mapped-port 80
3)Switch to Configuration > Objects > Address, and add a new address object for your Web
server.
CLI to create an address object
[0] address-object WebServer 192.168.1.55
247
All contents copyright (c) 2007 ZyXEL Communications Corporation.