ZyXEL Communications ZYWALL 1050 Support Notes page 271

ZyWALL 1050/ZyWALL USG 300 Support Notes
1) Login ZyWALL 1050/ZyWALL USG 300 GUI and go to Configuration > Network > ISP
Account. Then click the "+" to create a new account for a PPPoE connection.
2) Now, on the screen, you can give a name to this profile. Select the protocol as PPPoE.
Please set the Idle timeout to 0 if you do not want this link to be a subject to timeout. All other
parameters including the username and the password should be based on your ISP's
requirements. Finally, click "OK" to add this account.
3) Since we will have three PPPoE links in our scenario, you will need two additional PPPoE
271
All contents copyright (c) 2007 ZyXEL Communications Corporation.