ZyXEL Communications ZYWALL 1050 Support Notes page 102

LAN interface and IP address is 192.168.10.1/255.255.255.0. The ge2 and ge3 are WAN1 and
WAN2 interfaces and IP address are 179.25.3.24/255.255.0.0 and 179.25.133.4/255.255.0.0.
We have to pre-configure some address objects for the later VPN configuration
requirements. The needed address objects list is as follows:
The address object AsiaRegion (192.168.10.0 – 192.168.15.0) and EuropeRegion
(192.168.20.0 – 192.168.25.0) are used for the two regional center VPN concentrators
employed. When Asia region site like ZyWALL5 (192.168.12.0) tries to access the other
region's remote site like ZyWALL70 (192.168.22.0) it will match these two addresses' object
ranges and ZyWALL 1050/ZyWALL USG 300 can do next processing.
This ZyWALL 1050/ZyWALL USG 300 is the local center of Asia region. We need to setup
the VPN tunnel between local sites ZyWALL5 and ZyWALL35 and Europe region center
ZyWALL 1050/ZyWALL USG 300.
All contents copyright (c) 2007 ZyXEL Communications Corporation.
ZyWALL 1050/ZyWALL USG 300 Support Notes
102