ZyXEL Communications ZYWALL 1050 Support Notes page 324

ZyWALL 1050/ZyWALL USG 300 Support Notes
Please note that firewall may block those triggered services. So, if you have problems with
triggering the service, check firewall settings and its logs too.
F11. How do I use the traffic redirect feature in ZyWALL 1050/ZyWALL USG 300?
If you have a router located in LAN, you could regard the router as a gateway and fill its
address in a gateway field of the LAN interface which connects to the LAN router. Then,
configure the interface as a passive member of the trunk which you use in the policy routing.
In case all main links in the trunk go down, passive link (i.e. the LAN router) would be
activated to maintain the connectivity.
Note: While you configure the gateway address in the interface, please also choose a suitable
metric for the gateway or it would interfere with main links.
F12. Why can't ZyWALL learn the route from RIP and/or OSPF?
ZyWALL blocks RIP/OSPF routing advertisement from WAN/DMZ by default. If you find
that it fails to learn the routes, check your firewall to-ZyWALL rules.
324
All contents copyright (c) 2007 ZyXEL Communications Corporation.