ZyXEL Communications ZYWALL 1050 Support Notes page 11

User needs to configure the static IP address and then apply to the VPN Gateway
configuration page. The configuration steps are stated below:
1) Login ZyWALL 1050(USG 300) GUI, setup the ge2 interface for internet connection and
manually assign a static IP. The configuration path in ZyWALL 1050(USG 300) menu is
Configuration > Network > Interface > Edit > ge2
2) Switch to Configuration > Network > IPSec VPN > VPN Gateway select interface ge2
as My Address and then in Security Gateway Address field set the remote gateway IP to
167.35.4.3. The Local ID Type and content are IP and 210.110.7.1, Peer ID Type and
content are IP and 167.35.4.3.
3) Repeat the step1 & 2 to configure the Remote ZyWALL 1050(USG 300). The Local ID
Type & content and Peer ID Type & content are reverse to the Local ZyWALL 1050(USG
300).
All contents copyright (c) 2007 ZyXEL Communications Corporation.
ZyWALL 1050/ZyWALL USG 300 Support Notes
1
11