Adding Vlan Virtual Interfaces To The Zone - ZyXEL Communications ZYWALL 1050 Support Notes

ZyWALL 1050/ZyWALL USG 300 Support Notes

3.3.2 Adding VLAN virtual interfaces to the Zone

Now, since the security policy cannot be applied between interfaces but between zones, it
is necessary to add the VLAN virtual interfaces into different zones. Here we are going to
create three new zones for the three VLANs.
To create these zones, please follow the configuration steps as below:
1) Login ZyWALL 1050/ZyWALL USG 300 GUI and go to Configuration > Network >
Zone. Then click the "+" to create a new zone.
2) Give this zone whatever name you can understand later. Check the option "Block Intra-zone
Traffic" if you do not want the traffic between different interfaces included in this zone to be
allowed. And again click on the "+" icon to make interfaces join this zone.
264
All contents copyright (c) 2007 ZyXEL Communications Corporation.