ZyWALL 1050/ZyWALL USG 300 Support Notes
Here we need to modify the "Next-Hop" from "WAN_TRUNK" to "Interface" of the Bridge
interface (br1) that we just created.
Then click "OK" at the bottom to save the changes.
The CLI to create this rule:
[0] policy 1
[1] no deactivate
[2] no description
[3] user admin
[4] interface ge1
[5] source LAN_SUBNET
[6] destination any
[7] no schedule
[8] service any
[9] next-hop interface br1
[10] snat outgoing-interface
[11] no bandwidth
244
All contents copyright (c) 2007 ZyXEL Communications Corporation.