ZyXEL Communications ZYWALL 1050 Support Notes page 226

ZyWALL 1050/ZyWALL USG 300 Support Notes
Step5. Configure WWW Authentication Method
1. Go to menu Object > AAA server, modify the 'default' profile.
2. Configure the profile as following to be authenticated by LDAP server then local database
in ZyWALL.
Note: The "group ldap" shown in the figure below will use the settings in LDAP > Default,
rather than LDAP >Group.
3. Go to menu System > WWW, make sure the authentication method is the profile we just
modified. (That is, if I just have created another profile which is not named as 'default', then
here we have to choose it.)
226
All contents copyright (c) 2007 ZyXEL Communications Corporation.