ZyWALL 1050/ZyWALL USG 300 Support Notes
12) Click on the
icon to pick the right PPPoE interface. Also, for the "Mode" of the
Interface, if it is a "nail-up" connection, choose Active here and if it is a "dial-on-demand"
connection, select "Passive" here. The "Downstream Bandwidth" and the "Upstream
Bandwidth" are the values used for reference of the Load Balancing Algorithm.
13) Repeat the above steps until all the three PPPoE interfaces are added into this WAN_Trunk
interface.
294
All contents copyright (c) 2007 ZyXEL Communications Corporation.