Text Input; Initial Configuration; Wireless Lan Setup - ZyXEL Communications Prestige 2000W Quick Start Manual

2.3 Text Input

• When you need to enter text or numbers in a screen, use the Off key to clear the
default text or backspace.
• Use the up and down arrows to select the type of characters (capital letters, lower-
case letters, numbers or symbols).

3 Initial Configuration

Use the LCD screen menu system for initial configuration to make calls. Your service provider may have
already configured the settings for you.
Note: If your main screen already displays Registered, skip to

3.1 Wireless LAN Setup

When you turn the Prestige on, it searches for available wireless LAN Access Points (APs). It selects the AP
with the best signal and restarts and attempts to connect to it.
Use the following if you want to select a specific AP or enter a WEP key.
3.1.1 Site Survey
Do the following to browse the networks available in your area and select one.
1 Select Wireless in the first menu screen (use the up or down arrow to highlight
it and then press the Left key).
2 Select Site Survey.
3 The Prestige checks for and displays a list of available APs.
4 The AP's SSID is followed by a number describing its relative signal strength.
The higher the number, the better the signal. Select an AP to use.
5 Stay in the Wireless menu and continue with the next section.
VoIPon Solutions www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0) 1245 600560
Prestige 2000W Quick Start Guide
6
WEP key 1
**********
Ok
Section 4 on page 17.
7. Wireless
8. Restart
1. Information
Select
1. Site Survey
2. SSID
3. Network Mode
Select
AP1 99
AP2 90
AP3 85
Select
Aa1@ Clear
Back
Back
Back