Figure 48 Advanced: Wan Pppoe Encapsulation; Table 35 Pppoe Encapsulation - ZyXEL Communications ZyXEL Prestige P-330W User Manual

ZyXEL P-330W User's Guide

Figure 48 Advanced: WAN PPPoE Encapsulation

The following table describes the labels in this screen.

Table 35 PPPoE Encapsulation

LABEL
WAN Access
Type
User Name
Password
Service Name
Connection Type
Idle Time
MTU Size
Attain DNS
Automatically
81
DESCRIPTION
You must choose the PPPoE option when the WAN port is used with PPPoE.
Type the User Name given to you by your ISP.
Type the password associated with the User Name above.
Type the PPPoE service name provided to you. PPPoE uses a service name to
identify and reach the PPPOE server.
Select Continuous if you do not want the connection to time out.
Select Connect On Demand if you want to only connect when you are sending
data.
Select Manual if you do not want manually log the P-330W in via the GUI.
The amount of time before the PPPoE session times out and drops connection.
Enter in the maximum MTU (packet size) here.
Select this if your ISP assigns you a DNS server at the same time it assigns you an
IP Address.
Chapter 6 Advanced Options