GS-2024 User's Guide
where
<ip>
[in-band|out-of-
band|vlan <vlan-
id> ]
[ttl <1-255>]
[wait <1-60>]
[quesries <1-10>] =
This command displays information about the route to an Ethernet device. The following
example displays route information to an Ethernet device with an IP address of
192.168.1.100
Figure 111 traceroute Command Example
ras> traceroute 192.168.1.100
traceroute to 192.168.1.100, 30 hops max, 40 byte packet
1:192.168.1.100 (10 ms) (10 ms) (0 ms)
traceroute done:
ras>
28.5 Enabling RSTP
To enable RSTP on a port. Enter
.
[ENTER]
An example is shown next.
• Enable RSTP on the switch.
• Enable RSTP on port 10.
Figure 112 Enable RSTP Command Example
ras(config)# spanning-tree
ras(config)# spanning-tree 10
28.6 Configuration File Maintenance
The following sections shows how to manage the configuration files.
204
The IP address of an Ethernet device.
=
Specifies the network interface or the VLAN ID to which the
=
Ethernet device belongs.
Specifies the Time To Live (TTL) period.
=
Specifies the time period to wait.
=
Specifies how many tries the switch performs the traceroute
function.
.
spanning-tree
followed by the port number and press
Chapter 28 Command Examples