ZyXEL Communications Dimension GS-2024 User Manual page 194

GS-2024 User's Guide
Table 60 Command Summary: Configuration Mode (continued)
COMMAND
<index> start-addr
<ip> end-addr <ip>
service <[telnet]
[ftp] [http] [icmp]
[snmp] [ssh]
[https]>
admin-password <pw-string>
<confirm-string>
default- <in-band|out-of-
management band>
ssh known-hosts <host-
ip> <1024|ssh-
rsa|ssh-dsa> <key>
https cert-regeneration
<rsa|dsa>
timeout <0-65535>
multi-login
cluster <vlan-id>
name <cluster name>
member <mac-address>
password <password-
str>
rcommand <mac-
address>
diffserv
dscp <0-63> priority
<0-7>
mvr <vlan-id>
storm-control
<port-list>
type broadcast
packet-limit
<number>
192
[multicast]
[unknown-unicast]
Chapter 27 Introducing the Commands
DESCRIPTION
Specifies a group of trusted
computer(s) from which an
administrator may use a service
to manage the switch.
Changes the administrator
password.
Specifies through which traffic
flow the switch is to send
packets.
Adds a remote host to which the
switch can access using SSH
service.
Re-generates a certificate.
Sets the HTTPS timeout period.
Enables multi-login.
Sets the cluster management
VLAN ID.
Configures a name to identify
the cluster manager.
Sets the cluster member
switch's hardware MAC address
and password.
Logs into a cluster member
switch.
Enables DiffServ.
Sets the DSCP-to-IEEE 802.1q
mappings.
Enters the MVR (Multicast
VLAN Registration)
configuration mode.
See Section 27.9.6 on page 197
for more information.
Enables broadcast storm
control on the switch.
Enables broadcast storm
control on a port.
Sets the storm control type.
Sets how many packets a port
receives per second based on
the chosen storm control type.