Maintenance; Chapter 15 Maintenance; The Maintenance Screen; Figure 44 Maintenance - ZyXEL Communications ES-315 - V3.70 User Manual

C
H A P T E R
This chapter explains how to configure the screens that let you maintain the firmware and
configuration files.

15.1 The Maintenance Screen

Use this screen to manage firmware and your configuration files. Click Management >
Maintenance in the navigation panel to open the following screen.
Figure 44

Maintenance

The following table describes the labels in this screen.

Table 27 Maintenance

LABEL
Current
Firmware
Upgrade
Restore
Configuration
Backup
Configuration
Load Factory
Default
Save
Configuration
Reboot
System
ES-315/ES-315-F User's Guide
DESCRIPTION
This field displays which configuration is currently operating on the Switch. At the time
of writing, the Switch supports a single configuration.
Click Click Here to go to the Firmware Upgrade screen.
Click Click Here to go to the Restore Configuration screen.
Click Click Here to go to the Backup Configuration screen.
Click Click Here to reset the configuration to the factory default settings.
Click Config 1 to save the current configuration settings to Configuration 1 on the
Switch.
Click Config 1 to reboot the system and load Configuration 1 on the Switch.
Note: Make sure to click the Save button in any screen to save your
settings to the current configuration on the Switch.
15
Maintenance
93