Resetting The Switch; Logging Out Of The Web Configurator; Help; Figure 11 Web Configurator: Logout Screen - ZyXEL Communications ES-315 - V3.70 User Manual

Chapter 3 The Web Configurator
Be careful not to lock yourself and others out of the Switch. If you do lock
yourself out, you will have to reset the Switch.

3.6 Resetting the Switch

If you lock yourself (and others) from the Switch or forget the administrator password, you
will need to reset the Switch back to the factory defaults.
When you reset the Switch, all user-configured data is lost.
To reset the Switch, press the RESET button on the rear of the Switch for three to five
seconds, then release it. The Switch restarts. All information is reset to defaults, including the
IP address (192.168.1.1), the username (admin) and the password (1234).

3.7 Logging Out of the Web Configurator

Click Logout in a screen to exit the web configurator. You have to log in with your password
again after you log out. This is recommended after you finish a management session for
security reasons.

Figure 11 Web Configurator: Logout Screen

3.8 Help

The web configurator's online help has descriptions of individual screens and some
supplementary information.
Click the Help link from a web configurator screen to view an online help description of that
screen.
38
ES-315/ES-315-F User's Guide