Table of Contents
Advertisement
The following table describes the labels in this screen.
Table 6 Status: Port Details
LABEL
Port Info
Port NO.
Name
Link
Status
TxPkts
RxPkts
Errors
Tx KB/s
Rx KB/s
Up Time
Tx Packet
The following fields display detailed information about packets transmitted.
TX Packet
Multicast
Broadcast
Pause
Rx Packet
The following fields display detailed information about packets received.
RX Packet This field shows the number of good packets (unicast, multicast and broadcast)
Multicast
Broadcast
Pause
TX Collision
The following fields display information on collisions while transmitting.
Single
Multiple
Excessive
Late
Error Packet
RX CRC
ES-315/ES-315-F User's Guide
DESCRIPTION
This field displays the port number you are viewing.
This field displays the name of the port.
This field displays the speed (either 10M for 10Mbps or 100M for 100Mbps and the
duplex (F for full duplex or H for half duplex). It also shows the cable type (Copper or
Fiber). If the port is not connected, Down displays.
This field displays FORWARDING if the link is up, otherwise, it displays STOP.
This field shows the number of transmitted frames on this port
This field shows the number of received frames on this port
This field shows the number of received errors on this port.
This field shows the number of kilobytes per second transmitted on this port.
This field shows the number of kilobytes per second received on this port.
This field shows the total amount of time the connection has been up.
This field shows the number of good packets (unicast, multicast and broadcast)
transmitted.
This field shows the number of good multicast packets transmitted.
This field shows the number of good broadcast packets transmitted.
This field shows the number of 802.3x Pause packets transmitted.
received.
This field shows the number of good multicast packets received.
This field shows the number of good broadcast packets received.
This field shows the number of 802.3x Pause packets received.
This is a count of successfully transmitted packets for which transmission is inhibited
by exactly one collision.
This is a count of successfully transmitted packets for which transmission was
inhibited by more than one collision.
This is a count of packets for which transmission failed due to excessive collisions.
Excessive collision is defined as the number of maximum collisions before the
retransmission count is reset.
This is the number of times a late collision is detected, that is, after 512 bits of the
packets have already been transmitted.
The following fields display detailed information about packets received that were in
error.
This field shows the number of packets received with CRC (Cyclic Redundant Check)
error(s).
Chapter 5 System Status and Port Statistics
45
Advertisement
Table of Contents
Troubleshooting
