ZyXEL Communications ES-315 - V3.70 User Manual page 62

Chapter 7 VLAN
Table 15 Advanced Application > VLAN > VLAN Port Setting (continued)
LABEL
Acceptable
Frame Type
Apply
Cancel
62
DESCRIPTION
Specify the type of frames allowed on a port. Choices are All, Tag Only and Untag
Only.
Select All from the drop-down list box to accept all untagged or tagged frames on
this port. This is the default setting.
Select Tag Only to accept only tagged frames on this port. All untagged frames will
be dropped.
Select Untag Only to accept only untagged frames on this port. All tagged frames
will be dropped.
Click Apply to save your changes to the Switch's run-time memory. The Switch
loses these changes if it is turned off or loses power, so use the Save link on the
top navigation panel to save your changes to the non-volatile memory when you
are done configuring.
Click Cancel to begin configuring this screen afresh.
ES-315/ES-315-F User's Guide