FFS2001 Series
FCC Designation
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the interference at his own
expense.
Chapter 2
Safety
All statements regarding safety of operation and technical data in this instruction manual will only apply when the
unit is operated correctly.
Risk of Electrical Shock
Unplug the power cord before servicing the unit. Do not operate the unit without all covers and
items properly installed.
Caution
Argon is a chemically inert gas. It is colorless, odorless, tasteless, non-flammable, non-corrosive, and non-
toxic. However, the work area should be well ventilated so as to ensure that the correct oxygen level is
maintained.
Ensure that the operator is properly trained for the handling of compressed gases and regulators.
Small transparent fiber shards may be present in and around the work area, and as such, the necessary
measures should be taken to ensure the safety of the employee(s).
The colorless solution used to clean the fibers may be either acetone (>99%) or isopropanol (>99.5%). Both
are volatile and flammable. Ensure that the work area is well ventilated to avoid excessive inhalation of the
solution being used. Do not ingest and avoid contact with the skin and eyes. Prolonged skin contact may
result in severe irritation.
The recoat material is a flammable, toxic, acrylate compound. Avoid contact with the skin and eyes.
Rev. A, August 14, 2024
Chapter 2: Safety
Page 21
Need help?
Do you have a question about the Vytran FFS2001 Series and is the answer not in the manual?