Pull to disconnect the WLAN module from the mainboard connector. Then remove the WLAN
3.
module.
Screw Name
M 2.0 x 2.5
Disassembly Procedures
WEEE Annex VII Component:
WLAN Module
Figure 1-23. Removing the WLAN Module
Table 1-6. WLAN Module Screw
Screw Type
Torque
1.8~2.2kgf.cm
Quantity
1
1-19
Need help?
Do you have a question about the Swift Go 14 and is the answer not in the manual?
Questions and answers