Advertisement
SSD 1 Module Removal
Prerequisite:
Remove the screw securing the SSD 1 module to the upper case.
1.
Pull to disconnect the SSD 1 module from the mainboard connector. Then remove the SSD 1
2.
module.
Disassembly Procedures
Battery Removal
on page
Figure 1-13. Removing the Screw
Figure 1-14. Removing the SSD 1 Module
1-8
1-13
Advertisement
Need help?
Do you have a question about the Swift Go 14 and is the answer not in the manual?
Questions and answers