About The Brightness Of The Buttons; Main Specifications; About The Automatic Brightness Adjustment Function - Sanyo NV-E7000 Installation And Operation Manual

ABOUT THE AUTOMATIC BRIGHTNESS ADJUSTMENT FUNCTION

This unit uses a brightness sensor to detect the level of luminosity in the
surrounding area and automatically modifies the brightness of the screen in
accordance with the surrounding luminosity.
Brightness sensor
USING THE AUTOMATIC BRIGHTNESS ADJUSTMENT FUNCTION
As described in "How to adjust the image" (p.178 to 180), select "AUTO" for
the dimmer setting.
DISABLING THE AUTOMATIC BRIGHTNESS ADJUSTMENT FUNCTION
As described in "How to adjust the image" (p.178 to 180), select "MANUAL"
for the dimmer setting.
The unit will not modify the screen brightness even if the amount of light in the surrounding
area changes.

ABOUT THE BRIGHTNESS OF THE BUTTONS

When the power is turned ON, the characters appearing on the buttons of the unit
(POSITION, MENU, MODE, RETURN, VIEW, ENTER, OUT, IN, t, p, y,
(+, –, ) will light up blue.
181

MAIN SPECIFICATIONS

Type
Drive system TFT active matrix system
Do not cover the brightness
Screen size
sensor with a cloth. This will
Light source
disable the detection of
luminosity.
Hint
GPS antenna
Reception frequency
Reception system
Reception sensitivity
Updating Interval
Format
DVD VIDEO/CD PLAYER
Made for the following disc type:
p
) and
Reading format
Frequency range 20Hz to 20kHz
S/N ratio
High harmonic distortion 0.1% or less
Dynamic range
Wow and flutter Within or under the
MONITOR
Expansion output terminal
Liquid crystal color monitor
Power supply input terminal
7V type
Cold cathode tube
GPS exterior antenna input terminal
Brake terminal
NAVIGATION
Headphone output terminal
Micro-strip flat
antenna
Video I/O terminal Mini-jack
1575.42MHz
Audio I/O terminal/
(C/A cord)
optic digital audio output terminal
18 channels
parallel
–130dBm
S video output terminal S terminal
About 1 second
Original DVD
format
Power source
Current
Power consumption
¡DVD video
¡Music CD (CD-DA)
Temperature range
5 inch (12 cm) and
3 inch (8 cm) diameter
Non-contact optical
reading
(using a semiconductor
Exterior dimensions
laser)
(+1.0dB to –2.0dB)
85dB or more
Weight
88dB or more
* The specifications and design of this unit are
subject to change for improvements without
measurement limit
prior notification.
* The V-type monitor screen size (7V type) is a
standard based on the dimensions necessary
for an effective screen.
I/O TERMINAL
14 pin connector
DC 9V (EIAJ terminal)
GPS connector
Mini-jack
Stereo mini-jack
stereo mini-jack/optic
mini-jack
OTHER
AC 120V, 60Hz
DC 12V
2.0A (when using DC-DC)
18W (when using the navigation
system)
O
T
32 to +122°F (0 to +50°C)
H
(when in NAVI or VIDEO mode)
E
41 to +95°F (+5 to +35°C)
R
(when in DVD mode)
About 175X42X137mm
(width x height x depth)
*excluding projections
About 800g (main unit only)
182