To Start Playback - Sanyo NV-E7000 Installation And Operation Manual

TO START PLAYBACK

Power supply
switch
Ö
button
+ : increase volume,
– : reduce volume
1
Insert discs in the unit with the printed side up.
zSee p.52, "Inserting/removing a disc".
2
Slide the power supply switch upwards to turn ON
the power supply.
¡If the DVD mode screen appears, the unit automatically starts
playback.
¡If the VIDEO/NAVI mode screen appears, go to step
3
Press the Ü button to display "DVD".
Every time the button is pressed, the mode display switches in
the following order:
"VIDEO"
* The "DVD" indication will disappear after about 1 second.
* If a video deck/video camera is connected to the unit, "VIDEO"
(VIDEO mode) is added.
Hint
The unit is set to automatically start playback when switched to DVD mode.
141
DVD CD
Ü
button
Ö
button
PLAY/PAUSE button
– : reduce volume,
q
( )
+ : increase volume
PLAY/PAUSE
Ü
button
q
button ( )
3
.
"NAVI" "DVD"
4
Adjust the volume and image
(DIMMER/BLACK/DISPLAY/BEEP).
Adjust the volume using the Ö button.
Adjust the image as described in "How to adjust the image"
(p.178 to 180).
Hint
Depending on the DVD video, a title menu/DVD menu screen may be
displayed.
zSee p.145, "How to use the title menu", and p.146, "How to use the
DVD menu".
IF USING THIS UNIT INSTALLED IN YOUR VEHICLE
¡Because vibrations while driving cause sound and image
disturbance, avoid playback while driving. (Normal operation returns
when vibrations cease.)
¡If the unit's power source is the vehicle's 12V battery, for enhanced
safety, images cannot be viewed unless the parking brake is set.
(Sound can be heard.)
D
V
D
C
D
J
P
E
G
142