Other; Setting The Departure/Waypoint/Destination Points - Sanyo NV-E7000 Installation And Operation Manual

SETTING THE DEPARTURE/WAYPOINT/DESTINATION POINTS

POINTERS ON REGISTERING WAYPOINT AND DESTINATIONS
Set waypoint and destination using the most detailed map. Not doing so may result
in these locations being positioned differently than desired.
Example:
Having set a waypoint on a
highway parking area
detailed map
Direction of
the destination
1/8mi
The point may be set in the parking area
on the opposite direction of the destination
rendering a correct route impossible.
Set the waypoint(s) using the most detailed map along the parking area or lane in
the direction of the destination.
Verify whether the destination point is positioned in the proper lane using the
most detailed map. Do not set waypoint/destination points in intersections.
FINDING A POI MAP VIA A MENU SEARCH
Example:
A map with "---Aquarium" is selected from "Searching
for points of interest and retail establishments" and a
destination point is registered.
I really wanted
to take
Aquarium
this road...
1/8mi
Because this road is the nearest
to the destination mark, the point
along the road across the river
becomes the actual destination
point of the route search.
193
Example:
Having set a destination on a local
The most
road that has central dividers.
a n t
t a u r
R e s
I wanted to go
to the restaurant...
1/8mi
The unit may set the destination along the
opposite lane or may lead you on a wide
detour.
The departure/waypoint/destination point marks
are registered right on the POI, however, the
actual departure/waypoint/destination points for
the route search are set along the roads
available in the search data that are nearest to
the registered points. Because of this, the set
route may be different from the roads you
intended to take.
To avoid this, use the most detailed map to
register the point along the desired road that
is available in the search data in the proper
lane heading towards the destination.
v
Advise
If having registered a departure / waypoint /
destination point on a road not available in the
search data, the actual position of the point will be
set by the route search on the available road
nearest to those registered points in a straight
line. To determine whether a road is available in
the search data, see the roadmap legend in the
map disc's instruction manual.
SKILLFULLY CONSTRUCT A ROUTE USING WAYPOINTS
Example:
When there is a location you want to
stop at along the route.
If a waypoint(s) is not set, a route
( ) that doesn't pass through
desired stops may be provided.
Departure
Example:
Set waypoints in order starting from the location nearest to the departure point
(present location).
Good example
Destination
Waypoint3
Departure
Waypoint1
Waypoint4
Waypoint2
Example:
Wanting to get on/off a desired highway interchange.
Highway
Undesired
interchange
Waypoint
Local road
Desired
To Destination
interchange
Set the waypoint at the desired IC entrance (exit).
If not setting a waypoint(s), the unit may select an undesired IC leading you on a route
( ) with a wide detour.
Waypoint
Destination
Restaurant
I want to stop
at the restaurant
Bad example
Destination
Waypoint3
Departure
Waypoint1
Waypoint4
Waypoint2
Departure
Set the waypoint at the
desired interchange
entrance (exit).
194
O
T
H
E
R