Download Print this page
   

Advertisement

SERVICE MANUAL
*How to Disassemble
INDEX
Step 3
Step 4
.
Portable DVD Navigation
System
Exploded View........................................................pg1
PCB Main ROM (screw) Removal..................................pg3
DVD Mechanism Assy (screw) Removal...........................pg4
PCB ML Assy Removal..............................................pg4
PCB-W LCD Assy (screw) Removal...............................pg5
PCB-W KEY Assy (screw) Removal...............................pg6
PCB-W- SENSOR (screw) Removal...............................pg6
NV-E7000
(U.S.A.)

Advertisement

   Related Manuals for Sanyo NV-E7000

   Summary of Contents for Sanyo NV-E7000

  • Page 1: Table Of Contents

    PCB Main ROM (screw) Removal…………………………...pg3 Step 3 DVD Mechanism Assy (screw) Removal……………….…...pg4 Step 4 PCB ML Assy Removal………………………………….……pg4 Step 5 PCB-W LCD Assy (screw) Removal……………………..…..pg5 Step 6 PCB-W KEY Assy (screw) Removal……………………..…..pg6 Step 7 PCB-W- SENSOR (screw) Removal………………………...pg6 Portable DVD Navigation System NV-E7000 (U.S.A.)

  • Page 3: Step 1 Rear Cabinet Assy Removal

    REAR CABINET ASSY REMOVAL Step 1 Remove 4 screws A which fasten the REAR CABINET ASSY, and the Hook (Do Not Completely Remove Rear Cabinet without performing Step 2) Step 2 Disconnect FFC, 28P which is connected to the PCB-Main and PCB-LCD PCB- Main Hook REAR CABINET ASSY...

  • Page 4

    Page 3 PCB MAIN REMOVAL Step 1 Remove 6 screws B which fasten the PCB-Main Step 2 De-Solder the 4 LEAD WIRES placed on the PCB-Main Step 3 Disconnect FPC from PCB-Main. PCB- Main LEAD WIRES LEAD WIRES Step 4 Lift PCB-Main up and disconnect FFC, 45P before fully removing PCB-Main (PCB- Main can now be removed) FFC, 45P PCB- Main...

  • Page 5: Step

    Page 4 DVD MECH. Step 1 Remove the 3 screws C which fasten the DVD MECH. Step 2 Disconnect the FFC, 50P from the DVD MECH. (The DVD MECH. can now be removed) DVD MECH. FFC, 50P PCB-ML PCB-ML Step 1 Remove 8 screws D which fasten the PCB-ML to the REAR CABINET ASSY.(shown in the above picture) Step 2 De-Solder the 2 LEADWIRES placed on the FAN, MOTER, DC side.(The PCB-ML can now be removed)

  • Page 6: Step

    Page 5 PCB-W, LCD Step 1 Remove 2 E screws Step 2 De-solder 2 LEAD WIRES Step 3 De-solder 2 COPPER LEADS Step 4 Disconnect FFC, 6P form PCB-W, KEY (The PCB-W LCD can now be removed) LEAD WIRE / PCB-W, KEY COPPER LEADS FFC, 6P...

  • Page 7: Step

    PCB-W KEY Step 1 Remove Button Scroll (JOYSTICK) Step 2 Remove 2 F screws Step 3 De-Solder 3 LEAD WIRES Step 4 Remove 5 G screws (PCB-W KEY can now be removed) PCB-W SENSOR Step 1 Remove 1 H screw (PCB-W SENSOR can now be removed) PCB-W SENSOR- (H) screw PCB-W SENSOR...

Comments to this Manuals

Symbols: 0
Latest comments: