Sanyo NV-E7000 Installation And Operation Manual page 97

HOW TO ADJUST THE IMAGE (2)
3
Adjust or select using the Joystick (s).
DIMMER (AUTO/MANUAL) ADJUSTMENT
When the dimmer is
set to MANUAL
The brightness of the screen
remains constant regardless
of the amount of light in the
surrounding area.
Press g to brighten.
Press f to darken.
When adjusting the
brightness, set the dimmer to
AUTO and adjust to either H
LEVEL or L LEVEL.
When the dimmer is
set to AUTO
H LEVEL: The screen's brightness is adjusted when the amount of light
in the surrounding area increases.
L LEVEL: The screen's brightness is adjusted when the amount of light
in the surrounding area decreases.
* The H LEVEL cannot be adjusted towards the f side from the L
LEVEL value. (adjustment towards the g side possible)
The L LEVEL cannot be adjusted towards the g side from the H
LEVEL value.(adjustment towards the f side possible)
H LEVEL
Press the g side to increase the brightness.
Press the f side to decrease the brightness.
About dimmer adjustment
¡Dimmer adjustment is a function that enables the adjustment of the
brightness of the screen.
¡Using the Joystick (s) to set the dimmer to AUTO, the unit's
brightness sensor detects the surrounding luminosity and automatically
modifies the brightness of the screen to correspond to the brightness of
the surrounding area. For example, the screen is made bright when
there's a lot of light coming from the sun during the day and the
brightness is turned down at night or when driving through a tunnel.
Hint When the amount of light in the surrounding area changes abruptly such as when going in
and out of tunnels, the unit's sensor detects the change and adjusts the brightness in
about 3 seconds. (See p.181, "About the automatic brightness adjustment function".)
179
When selecting MANUAL for the
dimmer setting, the H LEVEL/L
LEVEL are not displayed.
DIMMER MANUAL
LEVEL
27
COLOR
2
TINT
R13
BLACK
0
DISPLAY FULL
BEEP ON
Turning ON the AUTO DIMMER
d
enables dimmer adjustment.
DIMMER AUTO
H LEVEL
27
L LEVEL
1
COLOR
2
TINT
R13
BLACK
0
DISPLAY FULL
BEEP ON
L LEVEL
Press the g side to increase the brightness.
Press the f side to decrease the brightness.
COLOR (VIDEO mode)
Press g to darken.
Lightened
Press f to lighten.
TINT (VIDEO mode)
Adjust until the skin tone of
Press g to enhance the green. the people appearing in the
image looks natural.
Press f to enhance the red.
Red enhanced Green enhanced
BLACK
Blackness
increased
Press g to increase the whiteness.
Press f to increase the blackness.
DISPLAY (VIDEO mode/DVD mode)
Select the desired screen display setting from 4 different types: FULL,
CINEMA, WIDE and NORMAL.
FULL : 4:3 image stretched on either side to fit a 16:9 screen.
CINEMA : enlarged 4:3 image screen
WIDE : screen with the "discomfort" of the full screen lessened
NORMAL : 4:3 image screen
* If having selected CINEMA, the upper and lower parts of the
screen are cut out in order to enlarge the image.
BEEP
Select the key operation sound ON or OFF (to make a "beep" sound
when keys are pressed).
4
To complete setting...
Press the Å button.
Darkened
Whiteness
increased
O
T
H
E
R
180