Changing The Unit Of Distance, The Color Of The Map And The Present Location Mark; Disabling The Registered Point Mark Display - Sanyo NV-E7000 Installation And Operation Manual

CHANGING THE UNIT OF DISTANCE, THE COLOR OF THE MAP AND
THE PRESENT LOCATION MARK
CHANGING THE COLOR OF THE
MAP AND THE PRESENT LOCATION
MARK System Setting
You can select the color of the map
(day, night, auto) and the present
location mark (red, yellow).
1
Press the É button.
2
Select from the
System Setting
drop-down menu and
press the Ä button.
3
Change the settings.
SELECT THE UNIT OF
DISTANCE
(mi/km)
Select the desired mark (mi/km) and
press the Ä button.
... Indicates that this condition is set.
Example of setting "mi".
123
SELECT THE MAP COLOR
(DAY/NIGHT/AUTO)
Select the desired color (day/night/auto)
and press the Ä button.
... Indicates that this condition is set.
Example of setting "auto".
QUICK MENU
Press the Ä button
on the map screen.
h d
Day Mode Night Mode
Auto Change
SELECT THE PRESENT
LOCATION MARK
(RED/YELLOW)
Select the desired color (red/yellow)
and press the Ä button.
... Indicates that this condition is set.
Example of setting "yellow".

DISABLING THE REGISTERED POINT MARK DISPLAY

DISABLING THE REGISTERED
POINT MARK DISPLAY
System Setting
Registered point marks can be
temporarily cleared from the map.
1
Press the É button.
2
Select from the
System Setting
drop-down menu and
press the Ä button.
3
Select .
Display Saved Location
4
Press the Ä button to
remove the mark.
The mark is removed.
5
To complete setting...
press the Ñ button to
return the screen to the present
location map.
Press the É button to
return to the menu screen.
DISPLAY THE MARK ON
THE MAP
4
As described in step , press the
Ä button again to place a
mark.
124
N
A
V
I