Changing The Slideshow Display Format; Selecting Play Mode - Sanyo NV-E7000 Installation And Operation Manual

CHANGING THE SLIDESHOW DISPLAY FORMAT

The slideshow image display method can be switched among 12 available
formats.
Press the π button while the image is displayed.
Repeatedly press this button to switch the display format in the order
below.
SLIDESHOW MODE
161
* Inoperable from the unit.
π
button
1 : Up to down
2 : Down to up
3 : Up/down to center
4 : Center to up/down
5 : Horizontal blind type
6 : Left to right
7 : Right to left
8 : Right/left to center
9 : Center to right/left
10 : 4-corners to center
11 : Vertical blind type
RAND : Random switch from format 1 to 11
NONE : Switch to normal

SELECTING PLAY MODE

You can select the image playback format.
Disc data screen (screen while playback is stopped)
<Example>
While the disc data screen is displayed, press the Joystick
(g) to move the cursor to the play mode selection
position.
Press the Joystick (d) repeatedly to switch among the following list (in
that order).
SINGLE : Display only one file.
REPEAT SINGLE : Repeat one file.
* The skip buttons (r/e) are disabled in this mode.
FOLDER : Display entire folder content and, when finished
displaying, the disc data screen appears.
REPEAT FOLDER : Repeat entire folder content.
RANDOM : Display folder content randomly.
SHUFFLE : Display folder content randomly and, when finished
displaying, the disc data screen appears.
* The mode is set when it changes.
TO END PLAY MODE SELECTION
Press the Joystick (s) to move the cursor to the file
selection position.
File selection position
Play mode selection position
D
V
D
C
D
J
P
E
G
162