How To Use The Title Menu; How To Use The Dvd Menu - Sanyo NV-E7000 Installation And Operation Manual

Portable dvd navigation system
Hide thumbs Also See for NV-E7000:
Table of Contents

Advertisement

HOW TO USE THE TITLE MENU

Depending on the DVD video, a title menu may be programmed in the stored
contents. In such a case, use the title menu to select a scene to playback.
* A "title" is a large segment of the image/sound content stored on a DVD video.
zSee p.174, "Terminology".
Ä
button
JOYSTICK (a)
1
Press the L button during playback.
The title menu appears.
2
Use the Joystick (a) to select the desired title and
press the Ä button.
Playback of the selected title is initiated.
Hint
¡A title menu may not be programmed depending on the disc.
¡The title menu is a part of the stored data in a disc and its content varies
depending on the disc.
¡Depending on the disc, the "Title Menu" may be called the "Menu" or the
"Title" or some other name. Also, the command "Press the ENTER
2
button" in step
may appear as "Press the SELECT button".
¡Please read the instruction manual that came with the DVD video being
played back along with this manual.
FINISH/STOP TITLE MENU OPERATION
Press the ® button.
Operable only with the remote control device.
DVD video playback is resumed from the position before the title menu
appeared.
* Playback may not be possible depending on the disc.
Refer to the instruction manual that came with the disc being played back for
details.
145
DVD
L
®
button
button
JOYSTICK (a)
Ä
button

HOW TO USE THE DVD MENU

A DVD menu may be programmed in the stored contents depending on the DVD
video. In such a case, use the DVD menu to select a scene to playback.
É
É
Ä
JOYSTICK (a)
button
1
Press the É button during playback.
The DVD menu appears.
2
Use the Joystick (a) to select an item and press the
Ä button.
3
If the selection screen continues, repeat step
Hint
¡Depending on the disc, a DVD menu may not be programmed.
¡Because the DVD menu is programmed in the stored data of the disc, its
content varies depending on the disc. For example, some discs enable
the playback of the main feature preview/trailers or the selection of the
audio/subtitle language or the scene.
¡When playing back a DVD programmed with DTS or Dolby Digital 5.1ch,
you can output the bit-stream signal from the unit's optical digital sound
output terminal. By connecting an AV amp with built-in DTS or Dolby
Digital 5.1ch decoder, you'll hear a striking, realistic sound quality that will
make you feel like you're in a movie theater or concert hall.
* Set the "AUDIO SETTING AUDIO OUT" to "OPT-RAW" in the "SETUP"
menu. (p.169)
* If using an AV amp (decoder) not compatible for DTS or Dolby Digital
5.1ch and playing back a DVD with DTS or Dolby Digital 5.1ch
programming may result in background noises unpleasant to the ears
and damage to your speakers.
¡Depending on the disc, "DVD Menu" may be called "Menu" or some other
name. Also, the message "Press the ENTER button" in step
"Press the SELECT button".
¡Please read the instruction manual that came with the DVD you are
playing back along with this manual.
FINISH/STOP DVD MENU OPERATION
Press the ® button.
Operable only with the remote control device.
Playback is resumed from the position before the time the DVD menu
appeared.
* Playback may not be possible depending on the disc. Refer to the instruction
manual that came with the disc being played back for details.
DVD
button
®
button
JOYSTICK (a)
button
Ä
button
2
.
D
V
D
C
D
J
P
E
G
2
may read
146

Advertisement

Table of Contents
loading

Table of Contents