Inserting/Removing A Disc - Sanyo NV-E7000 Installation And Operation Manual

ABOUT THE POWER SOURCE (2)
USING A HOUSEHOLD POWER SOURCE (AC 120V, 60Hz)
Use the AC/DC adaptor included with the unit.
Connect to the household power source
(AC 120V, 60Hz)
Connect to the DC
input 9V terminal
51

INSERTING/REMOVING A DISC (1)

INSERTING A DISC
1
Press the button for opening the cover.
Disc insert
aperture cover
AC/DC adaptor
2
Open the disc insert aperture cover.
3
Insert a disc.
Hint
Button for opening the cover
Place your finger here and
lift the disc cover.
Printed surface
¡When playing back, the disc rotates at a high speed. Make sure to insert the disc
and press down until a snap is heard to ensure that the disc will not fly off during
playback.
¡Insert 3inch(8cm) CDs in the same manner. (Adaptor not required)
I
N
T
R
O
D
U
The disc insert aperture
C
cover opens slightly. T
I
O
N
Align the disc's central
opening with the black
holder in the housing and
insert the disc with the
printed surface facing
upwards.
52