Using Tracks - Sanyo NV-E7000 Installation And Operation Manual

USING TRACKS (1)

USING TRACKS

Save Route Track
Place markers along the road already
followed and record them.
This function is helpful when wanting to
verify a road already traveled on or when
wanting to use the same road again.
This unit's recording function is
separated into 3 groups (memory 1,
memory 2 and memory 3).
1
Press the É button.
2
Select Save Route Track from
the drop-down menu
and press the Ä
button.
Group presently selected
To record tracks in the
presently selected group,
proceed as described in step
5
.
To record tracks in another
group, proceed as described
3
in step .
127
3
Memory
Select and press the
Change
Ä button.
4
Select the group in which to
Track
record tracks ( /
Memory 1
Track Track
/ ) and
Memory 2 Memory 3
press the Ä button.
Example of selecting "memory 2".
5
Recording
Select and press
Start
the Ä button twice.
The present location map is shown
and path recording starts.
Start recording tracks
When the present location mark moves, the
tracks appear.
This also starts the track registration
function.
Track display
Hint
¡About 1000 tracks can be
recorded for each group. If the
number of tracks exceeds that
capacity, the oldest tracks in
the group will be deleted
automatically and the new
tracks will be recorded.
¡Tracks can only be displayed
one group at a time (present
track memory). Also, track
colors vary by group (memory
1: black, memory 2: green,
memory 3: blue).
DISABLING TRACK
RECORDING FUNCTION
As described in step 2 (p.127), check if
Recording
the cursor is and press the
Stop
Ä button twice.
The present map is displayed.
A track is presently
The track presently
recorded in memory 2.
recorded in
( mark appears)
memory 2 is being
displayed on the
map. ( mark
appears)
DISPLAY THE DESIRED
TRACK
Display the tracks of the selected group
(memory 1/memory 2/memory 3) on the
map.
* Only one group can be displayed at a time.
Also, only displaying a track doesn't record it.
q Proceed as described in step
1
to
3
(p.127) to select the desired
Track Track
group ( / /
Memory 1 Memory 2
) and press the Ä
Track
Memory 3
button.
Select
128
N
A
V
I